Idiomas disponibles
Idiomas disponibles
SPECTRE Access UHF
Read only & osdp
Installation procedure
An antenna must be connected to the RF port 1 (closed to the LEDs).
RF Port 1
-
Attach the antenna on the module with the 4 screws (TCL ALU M4x12)
provided
with the module.
-
Remove the cap from port RF 1.
-
Connect the antenna to port RF 1 of the module.
Mount with 75 x 75 mm / 0.79 x 0.79 in Standard VESA
mounting bracket M4x12 polier screws provided with
mounting kit)
UHF SPECTRE Access
Lecture seule & osdp
Notice d'installation
Mounting an Antenna on Module - SLA
Reader Dimensions (mm / in) - SLA
© STid - 20 PA des Pradeaux FR13850 Gréasque - NI1127X05 - Page 4 sur 18 - Ed. 02/10/2020
Antenna Connection - SMA
Mounting - SLA
Two mounting possibilities:
Adjustable wall-mounted kit
(refer to the Installation Procedures
for KFX-UHF-08)
Wall
UHF SPECTRE Access
Solo lectura & osdp
Manual de instalación
4 serializable cable lengths are available:
1.5 m /4.92 ft: CAB-SPECTRE-1.5M
3 m / 9.84 ft: CAB-SPECTRE-3M
9 m / 29.53 ft: CAB-SPECTRE-9M
12 m / 39.37 ft: CAB-SPECTRE-12M
Only possible combinations:
CAB-SPECTRE-1.5M + CAB-SPECTRE-1.5M
CAB-SPECTRE-1.5M + CAB-SPECTRE-3M
CAB-SPECTRE-1.5M + CAB-SPECTRE-9M
CAB-SPECTRE-3M + CAB-SPECTRE-3M
Adjustable pole-mounted kit
(refer to the Installation Procedures
for KFX-UHF-09)
US
FR
ES
Antenna must be
connected to RF Port 1
Pole
