Stid SPECTRE Serie Manual De Instalación página 4

Ocultar thumbs Ver también para SPECTRE Serie:
Idiomas disponibles

Idiomas disponibles

SPECTRE Access UHF
Read only & osdp
Installation procedure
When the reader is switched on: the reader's red LED lights up. Reader initializing.
After initializing, the reader will look for a configuration tag for about 15 s, on antenna 1 (connected to RF port 1).
• If no tag detected: the antenna LED flashes "color RFON" (200ms) (blue by default) / RFOFF (200ms).
• If any tag detected: the antenna LED displays the sequence "color RFON" (blue by default) / "color DETECTION" (orange by default) for 200ms then LED OFF.
• If a configuration tag is detected: the antenna LED displays the sequence « color RFON "(blue by default) / "color DETECTION" (orange by default) for 200ms
then LED OFF then the antenna LED gives the followings indications:
3 GREEN flashes (500ms ON; 200ms OFF): the configuration tag is taken into account
3 RED flashes (500ms ON; 200ms OFF): the regulation (region) of the configuration tag does not match to the regulation of the reader.
3 PURPLE flashes (500ms ON; 200ms OFF): the key of the configuration tag does match to the reader key.
5 RED flashes (500ms ON; 200ms OFF): the model of the reader of the configuration tag does match to the model of the reader.
The end of the start sequence is indicated by the flashing of the reader LEDs (red and green) 3 times (500ms ON; 500ms OFF).
Power supply OK: fixed red LED
Power supply too low: blinking red LED (500ms ON / 500 ms OFF)
Temperature error: blinking red LED 5 times after all reading sequence. (RF Scan)
RF error, antenna problem: blinking red LED 3 times after all reading sequence. (RF Scan)
Communication: Green LED
Mount with a 75 x 75 mm / 0.79 x 0.79 in VESA standard
mounting bracket M4x12 stainless steel screws provided
with mounting kit)
Or mount directly on a wall
Ø4x35 aluminum screws provided (TCL ALU 4x12).
UHF SPECTRE Access
Lecture seule & osdp
Notice d'installation
© STid - 20 PA des Pradeaux FR13850 Gréasque - NI1127X05 - Page 3 sur 18 - Ed. 02/10/2020
Start Sequence - SMA / SLA
LED indication - SMA / SLA
Dimensions (mm/in) - SMA
Mounting - SMA
Two mounting possibilities:
Adjustable wall-mounted kit
(refer to the Installation Procedures
for KFX-UHF-08)
Wall
UHF SPECTRE Access
Solo lectura & osdp
Manual de instalación
.
Adjustable pole-mounted kit
(refer to the Installation Procedures
for KFX-UHF-09)
US
FR
ES
Pole
loading