Sangean TunPad DPR-202BT Instrucciones De Manejo página 6

Using DAB for the first time-DAB
1. Straighten up the antenna.
2. Press the Power button to switch on the radio. If the radio has been used before the
last used mode will be selected.
3. Press the Source button to select DAB mode. The display will show "DAB" for a few seconds.
4. If this is the first time the radio is used a quick scan of the DAB Band III channels may
be carried out. The display will show 'Scanning' (If the radio has been used before the
last used station will be selected instead.) During the scanning process, as new stations
are detected the station counter will increase and the stations will be added to the list
which is stored in the radio. The bar graph indicates the progress of the scan.
5. When scanning is completed the radio will list the stations found (in numeric-alpha
order 0....9...A...Z), unless it has previously been tuned to a DAB station. Press the
Tuning up/down button to scroll through the list of available DAB radio stations. Press
the Select button to select the highlighted station. The display may show 'Connecting...'
while the radio re-tunes. When a DAB station is found, the display will show the station
name on the upper line of the text display and broadcast information on the lower line.
Use the Volume button to set the sound level as needed.
6. If the station list is still empty after the scan the display will show 'No DAB Station"
then return to the DAB menu. If no stations are found it may be necessary to relocate
your radio to a position giving better reception.
Selecting a station-DAB
1. When playing a DAB radio station, the display normally shows the name of the current
station with other related information.
2. Press the Tuning up/down button to access the radio station list and to scroll through
the available stations.
3. Press the Select button to select the desired station. The display may show 'Connecting...'
while the radio re-tunes.
4. Use the Volume button to set the sound level as needed.
Note: If the display shows 'Service Not Available' it may be necessary to relocate your
radio to a position giving better reception. A question-mark in front of the station name
merely indicates that the station has not recently been detected by the radio. It may still
be available.
Secondary services-DAB
1. Certain radio stations may have one or more secondary services associated with
them. If a station has a secondary service associated with it the display will show ">>"
next to the station name on the station list. The secondary service will then appear
immediately after the primary service as you press the Tuning up/down button.
2. Press and release the Select button to select the station. Most secondary services do
not broadcast continually and if the selected service is not available, the radio will re-
tune to the associated primary service.
GB
5