Sangean TunPad DPR-202BT Instrucciones De Manejo página 11

Scan sensitivity setting-FM
Your radio includes a local/distant option for the auto-scan function. By setting the radio
to the 'local' scan option, weaker signals from more distant transmitters can be ignored
by the radio, making stronger signals easier to find.
1. Press the Power button to switch on your radio.
2. If needed, press the Source button until the FM band is selected.
3. Press and hold the Menu button until the Advanced FM menu shows on the display.
4. Press the Tuning up/down button until 'Scan setting" 'shows on the display. Press the
Select button to enter the scan sensitivity adjustment mode. The current setting will
be marked with an asterisk.
5. Press the Tuning up/down button to switch between 'Local' (Strong stations only) and
'Distant' (All stations) options on the lower line of the display. The Distant option will
allow the radio to find weaker signals when scanning
6. Press the Select button to confirm your selection. The Local or Distant setting is
stored in the radio and remains in force until changed or until a System Reset.
Stereo/Mono setting-FM
Your radio will play stereo broadcasts in stereo so long as the received signal is of
adequate strength. However, as a stereo signal becomes weaker the audio signal will
become poorer. It may be preferable to force the radio to play the station in mono in
order to reduce the level of audio noise.
1. Press the Power button to switch on your radio.
2. Tune to the required FM radio station as previously described.
3. Press the Tuning up/down button until 'Audio setting" 'shows on the display. Press the
Select button to enter the adjustment mode. The current setting will be marked with
an asterisk.
4. Press the Tuning up/down button to switch between "Stereo allowed" and "Forced
mono". Then press the Select button to confirm your selection.
Presetting stations-DAB and FM
You may store your preferred DAB and FM radio stations to the preset station memories.
There are 20 memory presets in your radio 10 for DAB and 10 for FM. Presets are
memorized by your radio in the event of a power failure.
The procedure for setting presets and using them to tune stations is the same for FM
and DAB mode, and is described below.
1. Press the Power button to switch on the radio.
2. Press the Source button to select the DAB or FM waveband.
3. Tune to the required station as previously described.
4. Press and hold the Preset button until "Preset Store" is shown on the display.
5. Press the Tuning up/down button to choose the desired preset number. Then press
and release the Select button to store the station under the chosen preset number,
"Preset 2 stored ", for example, is shown on the display.
10