Software Version; System Reset; Software Upgrades - Sangean TunPad DPR-202BT Instrucciones De Manejo

Software version

The software display cannot be altered and is just for your reference.
1. Press the Power button to switch on your radio.
2. Press and hold the Menu button until the Advanced menu of the current mode shows
on the display.
3. Press the Tuning up/down button until 'System ' appears on the display. Press and
release the Select button to enter the setting menu.
4. Press the Tuning up/down button until 'SW version' appears on the display. Then
press the Select button to enter the setting. The software version shows on the
display.
5. Press and release the Menu button to exit the software version display.

System reset

If your radio fails to operate correctly, or some digits on the display are missing or
incomplete carry out the following procedure.
1. Press the Power button to switch on your radio.
2. Press and hold the Menu button until the Advanced menu of the current mode shows
on the display.
3. Press the Tuning up/down button until 'System' appears on the display. Then press
the Select button to enter the setting menu.
4. Press the Tuning up/down button until 'Factory Reset' appears on the display. Then
press the Select button to enter the setting.
5. Press the Tuning up/down button until 'Yes' is highlighted on the display. If you do not
wish to carry out a system reset, highlight 'No' and then press the Select button. The
display will revert back to the previous display.
6. With 'Yes' highlighted, press and release the Select button. A full reset will be
performed. The station list and presets will be erased. Sleep timer settings will be
set to their default values. The display will show 'Welcome to Digital Radio' and the
unit will behave as when first switched on. In case of malfunction due to electrostatic
discharge, reset the product (reconnection of power source may be required) to
resume normal operation.

Software upgrades

Software updates for your radio may be
available in the future. As software updates
become available software and information
on how to update your radio can be found at
http://sg.sangean.com.tw/first/first.asp
http://www.sangean.eu/
www.sangean.com.au.
16