Safety Guidelines - Kettler 07881-300 Instrucciones De Entrenamiento Y Manejo

SAFETY GUIDELINES

GB
Information for your safety:
• To avoid injuries as a result of overstress or overload, the exer-
cise device shall only be operated according to the instruc-
tions.
• Prior to the first commissioning and after approx. 6 operating
days, check if the connections are mechanically secured.
• Regularly check the operability and the proper condition of
the exercising device.
• The safety technical controls are part of the obligations of the
owner and shall be implemented regularly and properly.
• The security level of the device can only be maintained if the
device is regularly checked for wear and damages.
• Defective or damaged components shall be replaced imme-
diately. Works on the electrical components shall only be im-
plemented by qualified staff. Only use KETTLER original spare
parts.
• Until repair the device shall no longer be used.
• For care, cleaning and maintenance only use the KETTLER De-
vice-Care-Set Art.-No. 7921-000
• Please clarify with your general practitioner before you start
the training, whether or not your health conditions allow you
to train with this device. The medical result shall be the basis
for the elaboration of your training program. Wrong or ex-
cessive training can lead to health impairments.
• The treadmill shall only be implemented for its intended pur-
pose, i.e. the walking and running exercise of adults.
• Please consider the maximum user weight.
• Only exercise with attached security key.
• Start the first training units at low speed to make yourself fa-
miliar with the new motion sequences.
• When feeling insecure, grab hold of the handle bars, leave
the treadmill over the side platforms and stop the belt.
Important: Please also note the safety guidelines in the installa-
tion and assembly instruction.
12
Safety Switch
• Prior to every training unit, insert the safety key into the safety
switch and attach the string of the safety key to your clothes.
Adapt the length of the string: When "stumbling" the safety
switch shall be released.
• The safety switch was developed to immediately shut down
the drives for the belt and the height adjustment in case you
fall or for emergency situations. Only use the safety switch for
emergency stops. To stop the treadmill during normal training
in a safe, comfortable and proper way under normal conditi-
ons, use the STOP button.
• Check the safety switch prior to the begin of your exercises
• Position yourself on the side platforms and start the belt at nor-
mal speed. Remove the safety key from the safety switch. The
belt must stop immediately. Afterwards reattach the safety key
to the safety switch and the string to your clothes. When the
belt is stopped, move backwards. The safety key must detach
from the safety switch. However the string shall remain atta-
ched to the clothes. Afterwards reattach the safety key back
to the safety switch.
Treadmill protection
• By removing the safety key an unauthorised use of the tread-
mill through third parties can be avoided. Please keep the sa-
fety key in a safe place and avoid children to get hold of the
safety key.