Technical Data; Router Safety Warnings; English; Mains Connection - AEG MF 1400 KE Manual Original

TECHNICAL DATA

Router
Production code
Rated input
No-load speed
Cage stroke
Collet diameter
Router diameter max.
Weight according EPTA-Procedure 01/2003
(Plunge Router)
Weight according EPTA-Procedure 01/2003
(Fix Router)
Noise information
Measured values determined according to EN 60745. Typically, the
A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A)) 84 dB(A)
Sound power level (Uncertainty K=3dB(A))
Wear ear protectors!
GB
Vibration information
Vibration total values (triaxial vector sum) determined according
to EN 60745
Vibration emission value a
Plunge Router
Uncertainty K=
Fix Router
Uncertainty K=
WARNING!
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 60745
and may be used to compare one tool with another. It may be used
for a preliminary assessment of exposure.
The declared vibration emission level represents the main applica-
tions of the tool. However if the tool is used for di erent applications,
with di erent accessories or poorly maintained, the vibration
emission may di er. This may signi cantly increase the exposure level
over the total working period.
An estimation of the level of exposure to vibration should also take
into account the times when the tool is switched o or when it is
running but not actually doing the job. This may signi cantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the operator from the
e ects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organisation of work patterns.
WARNING!
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric shock,
re and/or serious injury.
Save all warnings and instructions for future reference.

ROUTER SAFETY WARNINGS

Hold power tool by insulated gripping surfaces, because
the cutter may contact its own cord. Cutting a "live" wire may
make exposed metal parts of the power tool "live" and shock the
operator.

English

20
MF 1400 KE
4118 51 03...
4107 51 03...
... 000001-999999
1400 W
10000-23000 min
64 mm
8, 12 mm
(GB 1/4", 1/2")
40 mm
4,9 kg
3,7 kg
95 dB(A)
h
7 m/s
2
1,5 m/s
2
5 m/s
2
1,5 m/s
2
Use clamps or another practical way to secure and support
the workpiece to a stable platform. Holding the work by your
hand or against the body leaves it unstable and may lead to loss
of control.
Additional Safety and Working Instructions
Wear ear protectors. Exposure to noise can cause hearing loss.
-1
Use protective equipment. Always wear safety glasses when
working with the machine. The use of protective clothing is recom-
mended, such as dust mask, protective gloves, sturdy non-slip
footwear, helmet and ear defenders.
Never reach into the danger area of the plane when it is running.
Always use the protective shields on the machine.
Only use tools whose permitted speed is at least as high as the
highest no-load speed of the machine.
Chips and splinters must not be removed while the machine is
running.
Only use professionally grinded router cutters.
Only use router cutter with correct shank diameter.
Put the router back to original position after usage (loosen clam-
ping lever to secure cage).
Only move the workpiece in counter rotation to cutter (only work
oppositely oriented)! For security, use devices such as safety- and
pressure device, guide slide, rip fence, etc.
The dust produced when using this tool may be harmful to health.
Do not inhale the dust. Use a dust absorption system and wear a
suitable dust protection mask. Remove deposited dust thoroughly,
e.g. with a vacuum cleaner.
Always disconnect the plug from the socket before carrying out any
work on the machine.
SPECIFIED CONDITIONS OF USE
The router can be used for rabbeting, rounding o , chamfering,
routing of edges, as well as pitting in wood and plastic.

MAINS CONNECTION

Connect only to single-phase AC system voltage as indicated on
the rating plate. It is also possible to connect to sockets without an
earthing contact as the design conforms to safety class II.
Appliances used at many di erent locations including wet room
and open air must be connected via a residual current device (FI,
RCD, PRCD) of 30mA or less.
Under the e ect of extreme electromagnetic interferences from
the outside, temporary variations in the speed of rotation could
arise in particular cases.
Keep mains lead clear from working range of the machine. Always
lead the cable away behind you.
Only plug-in when machine is switched o .
MAINTENANCE
The ventilation slots of the machine must be kept clear at all times.
If the supply cord of this appliance is damaged, it must only be
replaced by a repair shop appointed by the manufacturer, to avoid
hazardous situations.
Use only AEG accessories and spare parts. Should components
need to be replaced which have not been described, please contact
one of our AEG service agents (see our list of guarantee/service
addresses).