Viceversa TIX Manual Del Usuario página 9

you have earth grounding. Never using defective or damaged cables. Use
extension cord only after you have ascertained that it is in perfect condition.
Never place plugged in parts in water or near water: it can short circuit!!
Scrupulously follow all and each of the above-mentioned safety norms.
The toaster can give off a pungent smell or produce a little smoke the first time
it is used: use once or twice without bread to eliminate the smell and possible
residue.
This is the normal consequence of the production process. The smell and light
smoke are harmless and innocuous and will go away after the toaster has been
used.
Instructions and recommendations for use
Do not toast food that drips during toasting/cooking: not only does this make
cleaning the toaster difficult; it can cause fires or electric shocks.
It is of utmost importance that before each use the crumb tray be free of
crumbs and possible drops of liquid.
You cannot place pieces of bread that are larger than the slots in the slots. Do
not insert aluminium or tin foil or kitchen utensils in the slots as this can cause
people severe bodily harm, electric shocks and accidents.
Do not use the toaster without the crumb tray, which must always be positioned
correctly.
After use, always unplug the toaster and empty the crumb tray and follow
cleaning and maintenance instructions.
You must use tongs with this toaster, in other words do not insert the bread
without tongs.
Toasting functions
1. Insert bread slices with tongs into the slots.
2. Choose your desired setting: the toaster has a selection of settings from 1-9.
A higher number indicates a higher degree/longer toasting time. You may
change the setting while toasting, even if it would be preferable to press the
stop button and re-start the process. Depending on the new setting chosen
the toasting process will be longer/shorter or come to a stop. Toasting starts
with the position / number 1.
3. Pull down the lever that is on the side of the toaster. Only then will the
toasting begin and the led lights will come on. (the stop light will also come
on). As time passes, the lights will go out slowly thus indicating the time left
for completion of the toasting process. The speed at which the lights go out
will depend on the time set.
4. Once the bread is toasted, the side lever will come and the lights will go out.
5. If you want to interrupt the toasting process simply press the stop button,
which stays on for the entire toasting process.
The timer/selector does not move as time passes: that is what the led lights are
for. Example: select setting 5, this number does not decrease; even once the
16
bread is toasted the setting will remain at 5.
Always unplug the cable when you have finished using the toaster!
Defrosting
Defrosting will lengthen cooking time to allow the slices of bread to defrost
before being toasted.
1. Put the frozen slices of bread with tongs in the slots.
2. Select the degree of toasting desired and pull down the lever. You can only
insert the defrost function once the lever is down. A blue light on the defrost
button will light up.
3. Follow steps 4 and 5 from the toasting instructions.
Cleaning and maintenance
Always unplug the cable when not in use and before cleaning. Do not immerse
or even partially immerse the cable, plug or toaster in water or other liquids.
1. Before cleaning the toaster it is imperative that it be unplugged. Do not
unplug by pulling on the cable.
2. Allow to cool down before adding or removing parts or before cleaning.
3. Only clean the outside surfaces of the toaster.
4. The toaster must be cleaned with a non-abrasive, dry or lightly damp cloth
with just a few drops of neutral detergent that is not aggressive. (never use
solvents).
5. Only clean the control panel where the operating buttons are with a soft
and dry cloth.
6. The two bread tongs, once they have been removed from the toaster can be
washed by hand using neutral soaps. Before re-using and therefore placed
back in their slots, ensure that they are perfectly dry.
7. To clean crumb tray:
• remove the tray from the toaster by pulling it from its slot;
• hand rinse all the surfaces with mild detergents
• ensure that it is completely dry before placing back into the toaster and slide
into slot properly.
8. If any bread should get stuck in the slots:
• turn off and unplug the toaster
• turn the toaster upside and shake it gently and wait for the pieces to fall
out naturally
9. Never insert any kind of utensil into the slots to remove bread or food residue:
the internal elements could get damaged and cause serious damage to the
toaster and people may get electrocuted or be severely injured when using
the machine on a subsequent occasion.
WARRANTY
From the date of purchase, this product is guaranteed by the manufacturer
for a period or 24 months. The warranty is only valid with a receipt, which will
17