Serial Numbers; Cleaning And Maintenance - Peg-Perego veloce Instrucciones De Uso

To remove the rear wheels: press the button as
illustrated and remove the wheel (fig_a).
To remove the front wheels: press the button under the
footrest as illustrated and remove the wheel (fig_b).
17 OPENING THE FRAME WITH A FORWARD-FACING CHILD
SEAT:
Align the handle bar with the frame (fig_a), slat the
chassis, move the safety button located behind the
handle bar (fig. b) to the right or left, and fully press the
central button on the handle bar (fig. c).
Open the chassis, release both buttons (b-c) and lift the
handle bar upwards (fig. d) until it is fully open and clicks
into place.
Lift the backrest (fig. e) until it clicks into place (fig. f).
18 OPENING THE FRAME WITH A REAR-FACING CHILD SEAT:
Align the handle bar with the frame (fig_a), recline the
chassis, move the safety button located behind the
handle bar (fig. b) to the right or left, and fully press the
central button on the handle bar (fig. c).
Open the chassis, release both buttons (b-c) and lift the
handle bar upwards (fig. d) until it is fully open and clicks
into place.
Lift the backrest (fig. e) until it clicks into place (fig. f).
19 POSSIBLE USES

SERIAL NUMBERS

20 Veloce has the information on the product's production
date on the rear tube of the frame.
_ Product name, production date and serial number of
the frame. This information is essential in the event of a
claim.
INSTRUCTIONS
SEAT
1 HOOD: To use the hood, pull it out completely until it
clicks into place.
The hood comes with a window, as shown.
2 The hood can be extended thanks to a practical zip (fig
a). It also comes with a further section that can be drawn
out for more shade (fig b).
3 Baby's ideal napping position is obtained by pulling the
hood and lowering the stroller's backrest completely.
4 FOOT MUFF (if present): slide the foot muff under the
front bar, unbutton the first side buttons of the hood
(fig.a), and button the sides of the foot muff to the
unfastened buttons of the hood (fig.b). Finally, fasten the
two buttons under the footrest (fig.c).
5 To remove the hood, release it from the tube of the
chassis as shown in the figure.
6 To reattach the hood, ensure the hook coincides with
the pin on the back of the tube of the chassis.
7 FOOTREST: To adjust the footrest to the desired position,
press the button on both sides and lower (fig.a) or lift
(fig.b) the footrest.
8 FRONT BAR: The front bar can be removed by pressing
the two buttons at its extremities (fig_a), or opened on
one side by pressing only one of the two side buttons
(fig_b). To reattach it, slide it into the applicable slots,
press the buttons and push it in until it clicks into place
(fig.c)
9 BACKREST: To adjust the backrest, lift the handle bar
(fig_a) and lower it to the desired position (fig_b). The
adjustable backrest can be locked into a number of
positions.
10 5-POINT SAFETY HARNESS: to fasten, insert the two
buckles into the waist strap (with the straps attached
in the crotch strap) until you hear a click (fig_a). To
unfasten them, press the button which is situated at the
centre of the seatbelt buckle and pull the waist strap
outwards (fig_b).
11 To tighten the waist strap, pull on both sides in the
direction of the arrow; to loosen it, do the opposite.
12 The safety harness can be adjusted in 3 positions
according to the child's height. You must use the higher
positions as the child grows bigger.
13 Adjust the height, inserting the straps with shoulder
pads through the eyelet in the backrest (fig_a) and pull
them through the desired eyelets (fig_b).
14 The seat can be folded. Release it from the frame, close
the hood, release the front bar, and press the backrest
adjustment handle as shown.
15 REMOVABLE LINING:
To remove the hood lining: unhook it from the frame
and unfasten the 2 buttons near the pins (fig_a), then
press the buttons on the two attachments and remove
the hood (fig_b).
Remove the two rigid supports (fig_c).
16 To remove the seat lining:
unfasten the inner button on both sides of the seat
(fig_a),
unfasten the 4 buttons on the seat (fig_b),
on the back of the stroller, pull the backrest adjustment
handle out from the fabric (fig_c).
17 Release the crotch strap under the seat base (fig_d) and
open the zip at the bottom of the back of the backrest
(fig_e).
You can now remove the lining.
18 Turn the lining inside out (fig. f), lift the rigid structure
and remove the safety belts from the slots (fig. g).
Remove the rigid part completely (fig. h).
19 REPOSITIONING THE LINING: To reposition the lining,
perform these operations in reverse order, but MAKE
SURE you start by repositioning the rigid part in the
relevant lining pocket, and then reposition and fasten
the safety belts through the slots. Now, once the rigid
part has been inserted completely, you can reposition
the lining.
SERIAL NUMBERS
20 Information relating to the production date of Seat can
be found on the seat, under the lining.
_ The product name, production date and serial number
of the frame.
This information is required for any complaints.
THE ORIGINAL ACCESSORY
PEGPEREGO
PegPerego accessories are designed as a useful, practical
means of simplifying the lives of parents. Discover all
your product's accessories on www.pegperego.com

CLEANING AND MAINTENANCE

Cleaning must only be carried out by adults.
PRODUCT MAINTENANCE: protect from the weather:
water, rain, or snow; prolonged and continuous
exposure to bright sunlight may give rise to colour
changes of various different materials; store this product
in a dry place. The maintenance have to be regularly.
CLEANING THE CHASSIS: periodically clean all plastic
parts with a damp cloth. Do not use solvent or
similar cleaning products; keep all metal parts dry to
prevent rusting; keep moving parts clean (adjustment
mechanisms, locking mechanisms, wheels, ...) and free
of dust and sand and, if necessary, lubricate with light
machine oil.
CLEANING FABRIC PARTS: Brush the fabric parts to
remove dust.
• When washing, closely follow the instructions stated on
the label sewn into the cover.
• Do not use chlorine bleach.
• Do not iron.
• Do not dry clean.
• Do not remove stains with solvents.
• Do not tumble dry.
- 22 -