Meat Probe - Hoover VISION HOZP9177BI Instrucciones De Uso

- To ensure correct data transfer, we recommend you to stay with the
device close to the appliance.
STEP 7
· Insert the password of your home Wi-Fi network.
· Select the type of password (WEP or WPA), then tap on "Confirm".
· The enrollment process is now finished.
NOTES
If this is not automatically synchronised by the App, please insert the
name of your home Wi-Fi network in the first box; pay attention to the
difference between lowercase and uppercase.
IF THE SET UP IS NOT SUCCESSFUL
It's important to establish a good Wi-Fi signal strength between the
home router and the appliance: low Wi-Fi signal strength would cause
the failure of the final stage of the set up. To assess if this is the case,
start the connection process again from Step 1; when you get to Step
6, when you get to Step 6, place your device (smartphone or tablet)
next to the router and search for "WIFIOVEN-xyzk" net generated by
the appliance. If this does not come up as an option, it means that the
router cannot see the appliance. In this case, we highly recommend
you to bring the router near the appliance (if possible) or contact your
internet provider to purchase a compatible "Wi-Fi Range Extender" to
increase the signal strength.
REMOTE CONTROL MODE
· Tap on One-Fi icon
ON
·
To stop any cooking in progress please turn off remote control mode
Quick Guide Hoover OVEN - Enrollment on App
Procedure for devices without Bluetooth 4.0 (or less
than 4.0)
This quick guide outlines the steps you should follow to enroll your
appliance using the App Hoover Wizard, utilizing a device without
Bluetooth technology. We recommend you to proceed with a
smartphone/tablet equipped with this technology to make the
procedure simpler.
STEP 1
· Make a note of the appliance Serial Number and Wi-Fi Name and
Password (WPA/WEP Key), which are normally found on the back of
your Wi-Fi router.
· Please make sure that your smartphone/tablet is connected to the
same Wi-Fi network.
NOTES
-The frequency of the home Wi-Fi network has to be set on the 2.4 GHz
band. You can not configure the appliance if your home network is set
to the 5 GHz band.
-If you are having trouble locating the WPA/WEP Password, please
contact your Internet Provider.
STEP 2
· Download the Hoover Wizard App from the Store.
· Open the Hoover Wizard App and create your user profile by taping
on "Register". Accept the privacy policy and fill in the required fields.
NOTES
-The App is available for Android (version 4.4 or higher) and iOS
(version 8.0 or higher) devices.
-If you already have a Hoover Wizard user profile, you can login using
your credentials.
STEP 3
In the homepage, tap on the icon with the three bars on the top left
to enter your profile, then tap on "REGISTER NEW APPLIANCE" and
select the name of the product that you want to enroll.
STEP 4
· Insert the purchase date of your appliance (DD/MM/YYYY), then tap
on "Proceed".
· Insert the 16 digits of the serial number or scan the QR code on the
appliance. Tap on "Next". Check data correctness and tap on
"Confirm". Once the system has recognized the product, tap on "Next".
STEP 5
· Tap the icon
· Press and hold the One-Fi icon for 3 seconds
· Click the "OK" of Standard Enrollment
In App - Tap on "Confirm".
NOTES
-Enrollment must be completed within 5 minutes.
-To ensure correct data transfer, we recommend that you stay with the
device close to the appliance.
STEP 6
· Exit the Hoover Wizard App.
· Go to your device Wi-Fi settings.
STEP 7
In the list of available Wi-Fi networks, select "WIFIOVEN-xyzk".
NOTES
- If you do not find it, wait few more seconds or proceed with a new
scan.
- Exit from the settings of your device.
- Return to the Hoover Wizard App and wait for the App to detect the
appliance
- Once the "Wi-Fi Network is active" screen appears, tap on "Next".
STEP 8
· Exit from the settings of your device.
· Return to the Hoover Wizard App and wait for the App to detect the
appliance.
· Once the "Wi-Fi Network is active" screen appears, tap on "Next".
STEP 9
· Insert the password of your home Wi-Fi network.
· Select the type of password (WEP or WPA), then tap on "Confirm".
NOTES
If this is not automatically synchronised by the App, please insert the
name of your home Wi-Fi network in the first box; pay attention to the
difference between lowercase and uppercase.
STEP 10
· Wait until the end of the data transfer process between the App and
the product, then tap on "Confirm". "CONNECTED" appears on the
appliance display and then "REMOTE CONTROL ON".
· The enrollment process is now finished.
.
NOTES
IF THE SET UP IS NOT SUCCESSFUL
It's important to establish a good Wi-Fi signal strength between the
home router and the appliance: low Wi-Fi signal strength would cause
the failure of the final stage of the set up. To assess if this is the case,
start the connection process again from Step 1; when you get to Step
5, place your device (smartphone or tablet) next to the router and
search for "WIFIOVEN-xyzk" net generated by the appliance. If this
does not come up as an option, it means that the router cannot see the
appliance. In this case, we highly recommend you to bring the router
near the appliance (if possible) or contact your internet provider to
purchase a compatible "Wi-Fi Range Extender" to increase the signal
strenght.
REMOTE CONTROL MODE
· Tap on One-Fi icon
· To stop any cooking in progress please turn off remote control mode.

4.1. Meat Probe

After meat probe is inserted
the
following pop up message to show available
Figure 9
● The user can now select oven temperature (max 200 degrees) and
meat probe temperature (max 90 degrees). (Figure 10)
● Cooking stops when meat probe temperature reaches the selected
one.
● After removing meat probe TFT shows home screen and all cooking
are now possible.
ON
Figure 10
EN 12
the display
user that only manu l program are available. Press ok at the a
GRILL+FAN CONVECTION MULTI-LEVEL
+FAN
shows a message informing
cooking modes. (Figure 9)
GRILL CONVENTIONAL