Cleaning And Maintenance; Safety Information; Cleaning In Auto Mode - Caso CB 2200 Manual Del Usuario

+
2. Press key to adjust the speed of blending function. In this blend mode, can select
three different speeds such as LOW(1), MEDIUM(2), HIGH(3) accordingly and no time
duration.
3. Put the ingredients into the glass bowl, cover up with lid and make sure it fits properly.
4. Once selected the blending speed, press key
finger on this key, the blending will continue, If you remove the finger from this key it will
stop.
5. The blending speed and time will make the texture of the preparation.
Please note
► For safety reasons, the blending function in manual operation will stop automatically
after few seconds.

16 Cleaning and Maintenance

This chapter provides you with important notices with regard to cleaning and
maintaining the device. Please observe the notices to prevent damages due to cleaning
the device incorrectly and to ensure trouble-free operation.

16.1 Safety information

Attention
Please observe the safety instructions, before cleaning your device
► Never immerse the base, glass bowl, power cord or mains plug into water.
► Do not clean glass bowls, interface and base housing with abrasive side of a sponge or
pad. Only use soft cloth to clean.
► Do not use any harsh abrasives or strong household cleaners or any abrasive tools as
these may damage the non-stick coating surface.
► Handle the blades inside the glass bowl carefully when cleaning them; they are very
sharp.
► Do not put the glass bowl in the dishwasher.

16.2 Cleaning in AUTO Mode

1. Fill the glass bowl with 1200ml of water with 3 or 4 drops of washing-up liquid.
2. Rinse the inside of the bowl using 'cleaning brush' to remove residue sticking on glass
bowl.
3. Wash the lid in water with washing up liquid and rinse it using 'cleaning brush', then
cover the glass bowl with lid.
4. Select auto cleaning function by pressing the key
Caso Mixer mit Kochfunktion CB 2200
to start blending. If you keep the
(P5) on control panel.
45