Overheating And Current Overload Protection; Cleaning And Maintenance; Safety Information; Cleaning - Caso GERMANY B 3000 Touch Manual Del Usuario

15.3 Overheating and current overload protection:

When the device was operating for longer time or was overloaded then the motor can
overheat and the overheating protection reacts. The device will stop automatically.
When the blades are blocked, the ingredients are too sticky, there is not enough liquid in
the jar or when the device was overloaded then the device can be overcharged. The
overload protection reacts. The device will stop automatically.
When the device has stopped automatically:
Pull the plug, then press reset button below the device. Plug in again, if device is working
normally you can go on, if not pull the plug again. Let the device cool down for at least 45
minutes. Now you can use the device again.
If you have any problem with this device, do not disassemble it by yourself. Always contact
the service department or after-sale service department.

16 Cleaning and Maintenance

This chapter provides you with important notices with regard to cleaning and maintaining
the device. Please observe the notices to prevent damages due to cleaning the device
incorrectly and to ensure trouble-free operation.

16.1 Safety information

Attention
Please observe the safety instructions, before cleaning your device
► Unplug the device when not in use and before any cleaning.
► Never immerse the device, cord or plug in water or other liquids and do not place in the
dishwasher.
► The blades are really sharp. Handle them with care.
► Please observe that the bottom of the jar do not has any contact with moisture.

16.2 Cleaning

Cleaning program „CLEAN"
Fill in water up to a maximum of 1/3 capacity and at 2-3 drops of cleaning solution. Choose
the cleaning program with button CLEAN and start with START.
The indicator will light up in the display and the device is working on highest speed level.
You can hear a signal tone when the end of program is reached. Press the stop button and
pull the plug from socket. Wipe the inner jar dry with a soft cloth.
Clean the surface of the jar and base with a soft cloth.
Lid, measuring cup (middle part of lid) and pusher can be cleaned under running water.
Dry all components with a soft cloth.
Caso B 3000 Touch 44