Troubleshooting - Klarstein 10032053 Manual De Instrucciones

TROUBLESHOOTING

Problem Possible Cause
Appliance does Mains plug is not plugged in
not work. or is loose.
Fuse has blown or is defective.
Socket is defective.
The food is too Temperature is not properly
warm. adjusted.
Door was open for an
extended period.
A large quantity of warm food
was placed in the appliance
within the last 24 hours.
The appliance is near a heat
source.
Appliance cools Temperature is set too cold.
too much.
Unusual noises. Appliance is not level.
The appliance is touching the
wall or other objects.
A component, e.g. a pipe, on
the rear of the appliance is
touching another part of the
appliance or the wall.
Water on the Water drain hole is blocked.
floor.
Suggested Solution
Insert mains plug.
Check fuse, replace if
necessary.
Mains malfunctions are to be
corrected by an electrician.
Please look in the initial
Temperature Setting section.
Open the door only as long as
necessary.
Turn the temperature regulation
to a colder setting temporarily.
Please look in the installation
location section.
Turn the temperature regulation
knob to a warmer setting
temporarily.
Re-adjust the feet.
Move the appliance slightly.
If necessary, carefully bend the
component out of the way.
See the Cleaning and Care
section.
EN
37