flir Lorex LNZ32P12 Serie Manual De Instrucciones página 15

4 Installation
6. Push one of the included O-rings (x4) onto each of the included mounting screws (x4).
Attach the PTZ camera firmly to the ceiling using the included mounting screws until
the O-rings are flush against the camera base. Use the included anchors if needed.
7. Re-attach the dome cover, ensuring that the rubber O-ring around the camera base is
in place and the alignment arrow* on the dome cover lines up with the camera base.
8. Tighten the dome cover screws using the included Allen key.
9. Remove protective vinyl sheet from the dome cover once installation is completed.
#LX400020; r.35429/35429; en-US
12