Keystone THE MACHINE III Manual Del Usario página 9

7. Move the switch from the
left heating position to the right
vacuum position to complete
the adaptation. With thicker
materials, allow the vacuum
to run longer for finer detail.
8. Using the round handle
attached to the front of the
heating unit, swing the heating
unit to its furthermost position
Turn
at the rear of the machine.
heater/vacuum
Note: Allow the heating unit time
on/off
to cool for at least 10 minutes
between operations (or placement
near a wall).
Do not allow the heating element
to rest over the handles at
anytime as they become very hot.
WARNING: The heater should
be operated for a maximum
of 5 minutes followed by a
maximum 1 minute vacuum time.
Turn heater switch off before
positioning heating unit in rear
of machine to avoid excessive
heating of electrical cord. Failure
to follow could damage the
cord (power cord is not under
warranty).
8