Environmental Conditions For Use And Storage; Machine Symbol Key; Technical Specifications - Keystone THE MACHINE III Manual Del Usario

ENVIRONMENTAL CONDITIONS
FOR OPERATION AND STORAGE
The heater in the vacuum forming machine may absorb
humidity/moisture when stored for a period of time. This may
penetrate to the internal connectors and cause the unit to short
circuit your GFCI outlet. If this occurs, we recommend using the
machine on a non-GFCI outlet for approximately twelve cycles.
This will enable the moisture to dissipate.
This situation is rare and is not cause for an alarm. Should you
wish to discuss it further, please contact The Machine III Service
Center at: 1-800-333-3131.
THE MACHINE III SYMBOL KEY
Fuse
Attention
!
Refer to
accompanying
documents

TECHNICAL SPECIFICATIONS

Model
Number 101
115 V~
50/60 Hz
1475 W
The Vacuum Forming Machine is intended for indoor use
in a standard dental laboratory environment.
Ambient Operating Temperature: 5-40˚C
Relative Humidity: Max 80%
Altitude: Maximum 2,000m
Installation Category: Nominally II
Pollution Degree: Nominally 2
Mains Supply Fluctuations not to exceed
+/- 10% of the nominal voltage.
I
Ground
Vacuum
Model
Number 202
230 V~
50/60 Hz
1475 W
O
On Off
Heater
Model
Number
202CE
230 V~
50/60 Hz
1475 W
13