English
Unit components
Please fold out illustration page at the front
1 Nozzle rest
2 Handle
3 High-pressure outlet
4 Manometer
5 Pressure/flow control
6 Water connection
7 Oil level display
8 Oil reservoir
9 Hood
10 Unit switch
11 Fastening screw for hood
12 Hose rest
13 Handgun support
14 Hose hook
15 Nozzle
16 Marking of the nozzle
17 Spray lance
18 Hand-held spray gun
19 Safety catch of hand-held spray gun
20 Lever of hand-held spray gun
21 High-pressure hose
22 Push-handle
23 Cable holder
24 Push-handle clamping screw
25 Detergent suction-hose with filter
26 Detergent metering valve
27 Accessories box
6
For your safety
Before you use the cleaner for the first time,
read these operating instructions and take
special note of the accompanying booklet
"Safety Instructions for High-Pressure Clean-
ers" No. 5.951-949.
Use of the cleaner
Use this appliance exclusively
– for cleaning operations with low-pressure
jet and detergent (e.g. cleaning of ma-
chines, vehicles, buildings, tools),
– cleaning with high-pressure jet without
detergent (e.g. cleaning facades, terraces,
gardening equipment).
For stubborn dirt we recommend the dirt
blaster as an optional accessory (for HD ...
Plus included in the delivery).
Safety features
Overflow valve with pressure
switch
On reducing the flow rate with the pressure
and flow control, the relief valve opens and
part of the water runs back to the suction side
of the pump.
If the lever of the hand-held spray gun is re-
leased, the pressure switch switches the
pump off. If the lever is retracted, the pressure
switch switches the pump on again.