Installation Instructions; Technical Specifications - PNI Escort C100 Manual De Usuario

EN

INSTALLATION INSTRUCTIONS

1. Take out the license plate.
3. Tighten the screws
ASSEMBLY SCHEME
Monitor
GND

TECHNICAL SPECIFICATIONS

Chipset
Resolution
Minimum illumination
Sensitivity
Video output
Waterproof
Functions
Power voltage
Medium consumption
Temperature of use
Camera
White
Blue
Rear power
2. Align the license plate to the installation location
4. Adjust up and down angles of the camera
7070
800 x 533 px
0.05 lm
+50dB
1.0Vp-p/75 (Ω)
IP68
Colorful rear view guiding lines
9 - 16V
120mA
-26°C ~ + 60°C
2
If you install the camera behind the car,
it is not necessary to cut the white wire.
If you install the camera in front of your
car, you need to cut the white wire to
reflect the image to the monitor correctly.
Cut the blue wire if you do not want the
markers to be displayed on the monitor.
Do not cut the blue wire if you want the
markers to be displayed on the monitor.