Sangean PR-D8 Manual De Instrucciones página 24

Recording
1. Select the desired source for the recording (MW/FM/AUX/SD –
Microphone) by pressing the band button. Set the volume to the
required listening level (the volume of the recording will not be
affected by this).
2. Insert the SD card.
3. Select recording bits rate by pressing menu button, the display
will show Record Setup. Press and release Play/Pause button to
select REC quality (initial setting at 128 kbps). Press
button to select between 64k/128k/192k and confirm the setting
by pressing Play/Pause button.
4. Press the RECORD button until the display will show "reading".
5. Press Play/Pause button to start recording. The display will flash
while recording and the record button will appear in red showing
that it is recording.
6. To stop recording, press STOP button, the display will show
"saving" and then "reading" followed by the file and folder
number indicating the recording file is saved as RECORD folder
on the SD card.
the
GB
24