Siemens Gigaset SE505 Guia De Manejo Rapida página 26

Quick Installation Guide
Windows XP
Make sure that the Use Windows to configure the settings function has
been deactivated.
This can be done as follows:
1. Click on Start – Control panel – Network and Internet connections
i
– Network connections – LAN or high-speed Internet.
2. Right click on wireless network connection, then click on Properties.
3. In the Wireless networks tab deactivate Use Windows to configure
the settings.
Once you have deactivated the Windows configuration you can set up the network:
1. Click on Start – Control panel.
2. Click on the Network and Internet connections icon and then on the Network
connections icon.
3. Double-click on the LAN connection with which you are connected to the router.
4. On the General tab, click Properties.
5. Select Internet protocol (TCP/IP) and click on the Properties button.
6. Activate the options Automatically obtain IP address and Automatically obtain
DNS server address on the General tab.
7. Click OK or Close to close each window.
8. Restart the network (see below).
Restarting the network
1. Restart the router by briefly unplugging the mains adapter from the mains socket
and then plugging it back in again.
2. Make sure the power LED on the front of the router is on continuously.
3. Restart your PC.
You have now configured and opened a link between your PC and the Gigaset SE505
dsl/cable.
24