Siemens Gigaset SE505 Guia De Manejo Rapida página 24

Quick Installation Guide
Activating
Connect the mains adapter cable to the 12V 1A socket on the router. Plug the mains
adapter into a mains socket.
This activates the Gigaset SE505 dsl/cable. The power LED on the front lights up. The
WAN LED also lights up, indicating that a modem is connected.
The LAN LED's light up when a device is connected to the corresponding LAN
connection.
The radio link to a PC that is connected by means of a wireless network adapter is now
opened automatically provided the network adapter has been configured with the same
SSID as the router (see page 21). Opening the radio link may take a few seconds. The
WLAN LED flashes when data are being sent or received over the wireless interface.
22