Electrical Connection - AGP DM9 Instrucciones De Seguridad

Electrical connection

The network voltage must conform to the voltage indicated on the tool name plate.
Under no circumstances should the tool be used when the power supply cable is damaged. A damaged
cable must be replaced immediately by an authorized Customer Service Center. Do not try to repair the
damaged cable yourself. The use of damaged power cables can lead to an electric shock.
230V models:
WARNING: Always use the Portable Residual Current Device
(PRCD) also known as a Ground Fault Circuit Interrupter (GFCI).
Always use this device whenever using the machine to reduce
the risk of shock hazards. Always position the device PRCD
as close as possible to the power source. Test and reset the
PRCD device before each use. Press the "Test" button to test.
Press the "Reset" button to energize the circuit to the machine.
110V models:
WARNING: Always use a Residual Current Device (RCD) also known as a Ground Fault Circuit Interrupter
(GFCI). Use an RCD in a separate control box with one or more socket outlets in accordance with EN
60309-2 with the earthing contact position 1 h. Always use this device whenever using the machine to
reduce the risk of shock hazards.
WARNING! 110V UK machines are not equipped with a PRCD portable residual current device or GFCI
ground fault circuit interrupter. The machine must always be used with an isolating transformer for
protection in case an electrical fault should occur.
ASSEMBLY
Thread the water supply assy. Into the hole in the bottom of gearbox and tighten with a wrench.
LIST OF CONTENTS
• Diamond core drilling machine.
• Mounting spacer
• Water feed assembly
• Wrench
OPERATING INSTRUCTIONS
1) MOUNTING THE CORE BIT
CAUTION: Ensure that the threads of the spindle and the core bit match. Attempting to mount
mismatched threads will result in damage to both threads.
GB
Reset Button
230V models
7
On Lamp
Test Button