EN
24
SAFETY FEATURES
Tip-Over Safety Feature
This heater is equipped with a tip-over safety feature. Once the heater is tipped over,
an internal switch will automatically shut the heater off. Once the heater is restored an
upright position, the heater will reset. To continue operation, turn on the heater using the
supplied remote control or the control panel on the heater.
Overheat Safety Feature
This heater is equipped with a overheat safety feature. When the heaters internal
components reach a certain temperature that could cause overheat and possible fire,
the heater will automatically shut off.
CLEANING AND CARE
1. Turn off the power switch in the rear of the unit.
2. Unplug the unit and let it cool completely.
3. To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth.
You may use a mild detergent if necessary. After cleaning, dry the unit with a soft
cloth.
Note: DO NOT let liquid enter the heater.
4. DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough
brushes to clean the heater. This may cause damage or deterioration to the surface
of the heater.
5. DO NOT immerse the heater in water.
6. Wait until the unit is completely dry before use.
7.
Air filter needs cleaning after used 3 months of use. Please take off the filter with the
2 steps in the drawing below. Flush and clean the filter with water, Then, dry it out
and re-assemble.
8. If you do not use the heater for a long time, please take out the remote batteries (to
prevent corrosion ) as shown below. Store the remote in a safe place.