df models KL-35 Manual De Instrucciones página 28

> Or: Press the set button again until you have reached the desired value.
LED blinks 2 times: 2.6V/cell
LED blinks 3 times: 2.8V/cell
LED blinks 4 times: 3.0V/cell
LED blinks 5 times: 3.2V/cell
LED blinks 6 times: 3.4V/cell
Proceed in the same manner for the additional programming steps.
A signal sound will be heard (in the programming mode) to simplify programming. If an LED
blinks more than 5 times, a long signal sound will be heard and the LED will be lit longer. If the
LED is lit longer followed by a short blinking (a long signal sound followed by a short one), then
that indicates the 6th selection option. Accordingly. a longer shining of the LED followed by
two short blinks (a longer signal sound followed by two short ones) indicates the 7th selection
option.
Programming steps
Programming step 1:
Presetting: "forward with brake",
Selection: "forward with brake",
"forward/reserve with brake"
In the operating mode "forward with brake", the model now moves forward and brakes. This
operating mode is suited for use with racing.
In the operating mode "forward/reverse with brake", the reserve gear can be switched which
enables better manoeuvrability for beginners during training drives.
To switch to reverse gear, move the control level into the brake position until the model stops.
A short release of the brake and renewed "braking" will switch to reserve.
This "double click" prevents accidental switching to reverse.
As soon as the control lever has been put into the "forward" area past the neutral
setting, the motor will immediately move forward again!
Operating modes
-  -
1100_1101/V1/0110