Location and
Function of Controls
Top/Front/Left Side
Rear/Right Side/Bottom
1 I / 1 (on/standby) key
Turns on the projector when the
projector is in standby mode. The ON/
STANDBY indicator around the I / 1
key lights in green when the power is
turned on.
T H E T R U S T E D S O U R C E F O R P R O J E C T O R L A M P S A N D A C C E S S O R I E S
When turning off the power, press
the I / 1 key twice following the
message on the screen, or press and
hold the key for about two seconds.
10
GB
Location and Function of Controls
TILT
For details on steps for turning off the
power, see "To turn off the power" on
page 29.
2 ON/STANDBY indicator (located
around the
/
I
1
Lights up or flashes under the following
conditions:
– Lights in red when a AC power cord is
plugged into a wall outlet. Once in
standby mode, you can turn on the
projector with the I / 1 key.
– Lights in green when the power is
turned on.
– Flashes in green while the cooling fan
runs after the power is turned off with
the I / 1 key. The fan runs for about
90 seconds after the power is turned
off.
The ON/STANDBY indicator flashes
quickly for the first 60 seconds.
During this time, you cannot light up
the ON/STANDBY indicator with the
I / 1 key.
For details on the LAMP/COVER and
the TEMP/FAN indicators, see on
page 46.
3 TILT adjustment key
For details, see"How to use the powered
tilt adjuster" on page 11.
4 INPUT key
Selects the input signal. Each time you
press the key, the input signal switches
as follows:
t
t
INPUT A
MS
(VPL-CX6
only)
5 Lens protector (lens cover)
The lens protector automatically opens
when the power is turned on.
6 Front remote control detector
7 Ventilation holes (exhaust)
key
)
t
VIDEO
S VIDEO