Cleaning And Disinfection; Before Cleaning; Cleaning And Disinfection Of Nebulizer Parts/ Accessories - GERATHERM micromesh GT-7002 Instrucciones De Uso

Cleaning and Disinfection

Please clean your device after each use according to the
instructions below.
Note: After every use (inhalations) please rinse the
nebulizer with water by fi lling the medication cup with water
in order to clean the membrane.

Before Cleaning

Make sure that the nebulizer is turned off before disas-
sembly.
1. Remove the unit lid, mask,
mouthpiece and adapter from
the unit. You could remove
the adapter from mesh cap
by slightly turning in clock-
wise direction.
2. Remove the mesh cap by
gently pressing the fl ap and lifting up in the direction in-
dicated the arrows.
3. Discard any remaining inhalant (pay attention to statu-
tory provisions).
GB

Cleaning and Disinfection of Nebulizer Parts/ Accessories

Cleaning after every use
Clean the mask, mouthpiece, unit lid, adapter and
mesh cap after each use.
1. Disassemble the components from the unit.
2. Rinse all above-named parts under a small stream of tap
water.
3. Gently wipe off excess water with
a clean dry cloth and allow to air
dry. Possible remained drops on
the mesh surface could remove by
easy shaking of mesh cap.
2
34
1