General Product Information; Intended Use; Installation Location; Installation Position - GOK 500ERAZ Instrucciones Par El Montaje Y El Funcionamiento

GENERAL PRODUCT INFORMATION

A filter is a device which keeps solid particles greater than a certain size out of the operating
medium being pumped. According to EN 12514-2, the filter in fuel oil consumer installations
must keep out foreign bodies with a particle size > 0.2mm.
Dirt and rust particles or sediment which results from the oxidation of hydrocarbons during the
ageing of fuel oil may be present in fuel oil.
If these foreign bodies are not filtered out then increased wear on the sensitive components of
the burner such as pump, preheater and nozzle is to be expected to the point of failure.

INTENDED USE

Operating media
• Diesel fuel
• Bio fuel oil max. 20% (V/V) FAME
E, EZ, EAZ,
You will find a list of operating media with descriptions, the relevant
standards and the country in which they are used in the Internet at
www.gok-online.de/de/downloads/technische-dokumentation.

Installation location

• for being installed in oil systems designed as single string system with return supply
• above and below the tank crown, respectively
Use in areas prone to flooding
Damage to the product from flooding
Suitable for installation in areas at risk of flooding only to 10 m water height.

Installation position

• Installation position vertical as a matter of principle
Application example: Fuel oil consumer installation as ZÖV
Item No. 13 852 50 c
• FAME • Fuel oil
• Bio fuel oil max. 50% (V/V) FAME
ERAZ, ZAZ
• Vegetable oil
Shut-off device
Pressure
compensation valve
type DAV7P
Tank withdrawal
armature type VTK-3
Single conduit filter
type 85E
Single conduit filter
type 500EAZ
Pump
3 / 14