Hose & Steam Head Assembly; Filling The Water Tank - STEAMONE H8S Guia Del Usuario

fig.11

Filling the water tank

Never use water that contains additives (starch, perfume,
aromatic substances, softener...) in the steamer. Additives can
affect the properties of steam, corrode internal parts and lead to
the formation of deposits.
1. Ensure that the steamer is unplugged. Remove the
fig.13
2. Unscrew the cap located at the bottom of the tank
3. Replace the cap and place the water tank back on
fig.15
Always check to be sure that the water tank is full before using
your garment steamer.
Lift the water tank to make
sure there is water in the
reservoir. (fig.16)
After checking the reservoir,
replace the water tank on
the base.
Hose & Steam head assembly:
1. Push the hose connector into the base until
resistance is felt. Lock the connector by turning
clockwise. (fig.11 & fig.12)
2. Hang the steam head on the head
support/hook. (fig.1)
fig.12
The steamer can be used with tap water. If
the water in your area is hard, Steamone
recommends that you use distilled or
demineralized water to reduce scaling.
water tank from the base of the appliance by
pulling the handle upwards. (fig.13)
and fill with water. (fig.14)
to the base. (fig.15)
fig.14
fig.16
8