SAFETY INSTRUCTIONS
This product is listed by UL. Representative samples of this product have been
evaluated by UL and meet applicable safety standards.
The voltage of your electrical installation must correspond to that
of the appliance (120V). Connecting to the wrong voltage may
cause irreversible damage to the appliance and will invalidate the
guarantee.
ALWAYS FOLLOW THESE IMPORTANT SAFETY
INSTRUCTIONS BEFORE USING:
Do not use this appliance for purposes other than what it was intended for.
-
To reduce the risk of burns from hot water or steam, always hold the steam
-
head away from your body during operation.
To avoid electric shock, never immerse the appliance in water or any other liquid.
-
Always turn the appliance «OFF» before plugging it in to, or removing it from the
-
outlet. Grasp the plug and pull to remove it from the outlet; never pull on the
cord. Do not operate the appliance if the power cord is damaged.
Disconnect the appliance from the electrical outlet when filling the water tank,
-
emptying or when not in use. Fill only the water tank with water; do not pour
directly into the water reservoir.
Never point the steam head at people or animals, or steam the garment while
-
wearing.
Use caution when using the appliance near children; never leave children
-
unattended near the appliance.
Let the appliance cool completely before storage and do not allow the power
-
cord to touch hot surfaces.
This appliance has a polarized plug and will fit into a polarized outlet only one
-
way. If the plug does not fit in to the outlet, reverse the plug and try again. To
minimize the risk of electric shock do not force the plug in to the outlet; do not
alter the plug in any way. If it does not fit, try another outlet or contact a
qualified electrician.
Do not operate the appliance if it has been dropped or damaged.
-
To avoid the risk of injury, fire or electric shock, do not attempt to disassemble
-
or repair the appliance; take it to a qualified service center for repair.
Use caution when emptying the water tank after use; water in the tank may be
-
hot. Do not touch metal parts until the unit has cooled to avoid the risk of burns;
use caution when changing attachments, they may be hot or contain hot water.
Always keep the hose and nozzle elevated above the water tank.
-
4