Technical Data; Specification; Guarantee - Solo 2000631 Manuel De Instrucciones

9. Technical data

Engine typ
Displacement cm
Fuel tank capacity l
Carburetor
Fuel mixing ratio:
using „CASTROL SUPER TT"/ with alternative two-stroke oil 1:50 (2%) / 1:25 (4%)
Fuel consumption at max. speed l/h
Engine idling speed 1/min
Max. output at RPM of Cutter blade 1/min
Max. permissable PPM (1/min)
Max. torque at RPM Nm (1/min)
Max. output at RPM specifications kW (1/min) 0,75 / 7000
Air filter
Ignition
Work site related noise emission value LPeq to EN ISO 11200* db(A)
Sound pressure level LWeq nach EN ISO 3774* measured/ guaranteed db(A) 94/ 96
Weighted average of acceleration acc. to ISO 7916 at max. speed m/s
Weight (ready to use)
Dimensions mm

10. Guarantee

SOLO guarantees problem-free quality and will assume the costs for defect remediation by re-
placing the defective parts in the case of material or manufacturing defects that occur within the
guarantee period after the date of purchase.
Please note that specific guarantee conditions apply in some countries. Ask your sales person if
you have any questions. As vendor of the products he is responsible for the guarantee.
We request your understanding that no guarantee can be assumed for damages due
to the following:
• Non-compliance with the operating instructions.
• Neglecting required maintenance and repair work.
• Damages due to improper carburetor adjustment.
• Normal wear and tear.
• Obvious overload through persistently exceeding the upper performance limits.
• Using non-approved tools and cutting fixtures.
• Using non-approved cutting bar and chain lengths in the case of chain saws.
• The use of force, improper handling, misuse, or accident.
• Damages caused by overheating due to dirt build up on the ventilator casing.
• Intervention by non-specialized persons, or improper repair attempts.
• The use of unsuitable replacement parts or parts other than SOLO original parts to the extent
that they cause damage.
• Using unsuitable fuel or fuel that has been stored too long.
• Damages that can be traced to implementation conditions from the rental business.
Cleaning, care, and adjustment work are not recognized as guarantee performances. All guarantee
work must be carried out by a SOLO dealer.
16
3
SOLO single cylinder two-stroke engine
29
0,45
all-position diaphragm carburetor with primer and integrated fuel pump
0,8
2800
185
7000
0,97
Foam filter
electronically controlled magneto ignition
79,2
2
6
11,35 kg
1170 x 425 x 915