Decommissioning And Storage; Maintenance Schedule; Wearing Parts - Solo 2000631 Manuel De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

7.7 Decommissioning and storage

If the equipment is to be stored for longer than three months, carry out the following measures:
Drain and clean the fuel tank in a well ventilated location.
Start the engine with an empty fuel tank to drain the carburetter, until the engine stops.
Otherwise oil residues in the fuel mixture can clog the carburetter jets and make subsequent
starting difficult.
Clean the motorised equipment thoroughly (particularly the air inlet opening, the cylinder fins,
the air filter and the area around the fuel filler).
Store the equipment at a dry and secure location. Keep the equipment away from open flames
and similar.
Prevent unauthorised use - particularly by children.

7.8 Maintenance schedule

The following information relates to normal conditions. For
especially arduous conditions, for example in case of longer
daily work, the indicated maintenance intervals may need to
be reduced. Prior to commencement of work
Carburetor
Air filters
Spark plug
Cooling air inlet
Cylinder head fins
Fuel tank
Fuel tank filter
All accessible screws (except carburetor adjusting screws)
Controls (stop switch, throttle lever)
Total machine
Carry out maintenance steps regularly. Ask a service agent to carry out maintenance work, if you
cannot undertake all of them yourself. The equipment owner is also responsible for the
following: Losses caused by inadequate maintenance and repair work or work which has been
carried out too late Consequential losses - even corrosion - caused by unsuitable storage

8. Wearing parts

Various components are subject to normal wear and may require timely replacement.
The following wearing parts are excluded from the manufacturer's warranty:
Air filter
Fuel filter
All rubber components which come into contact with fuel
Spark plug
Starting equipment
(1) = one
check idle run
adjust idle run
clean
replace
adjust electrode gap
replace
clean
clean
clean
replace
re-tighten
function test
visual check
clean
X
X
X
X
X
X
X
X
X
X
X
1)
X
X
X
X
X
X
15
Tabla de contenido
loading

Productos relacionados para Solo 2000631

Tabla de contenido