Wellclima DOUBLE Manual De Instrucciones página 2

Please insert 2 alkaline batteries 1,5V type AAA and plug-in the Air Conditioner to the electric line.
There are 3 ways to configure your new remote control, A, B and C:
A> Brand point-to-point quick search
1. Aim the remote control towards the air conditioner receiver window.
2. Press and hold the appropriate code button corresponding to your A/C brand (for example ▲ but-
ton for LG and Samsung brand) until the air conditioner turns on and you hear a 'beep' sound;
release the button, and the setting is completed.
3. Check the button functions. If the buttons work correctly, the code setting is effective. If not, please
repeat steps 2 and 3.
H
B> Manual Code Input
1. Connected to www.wellclima.com website, find air conditioner brand in the 'CODE LIST' of
DOUBLE model and check the first set of codes.
2. Press and hold SET button, then press POWER
buttons when the model code '---' flashes on the screen window. Press 'TEMP▲' or 'TEMP▼' until
the code found in Step 1 appears on the screen window (you can keep the TEMP keys pressed to
scroll the codes faster).
3. Press the SET button to exit, check the button functions. If the device respond correctly the setting
is finished, if not, please repeat steps 2 and 3 with next set of codes.
LOOK OUT: when the codes are separated by a - sign it means all the numbers between the first
and the last (es LG 600-609 you have to test codes 600, 601, 602.....>609).
If none of the codes work with your air conditoner or if your brand is not in the list don't worry,
proceed with the Automatic Code Search
C> Automatic Code Search for applicable model
1. Aim the remote towards the air conditioner receiver window.
2. Press and hold SET button, about 6 seconds later the model code'---' starts to flash, do not
release the button until the air conditioner switches on automatically.
3. Release the SET button immediately when the conditioner turns on and check the button functions.
If the buttons work correctly, the code setting is effective. If not, please repeat steps 2 and 3.
Press and hold SET button and then press FAN
restore the factory settings.
Fun
Fun
control
key
Fun
Air Recircolation
1. Control two sets of A/C simultaneously
The remote can control two air conditioners of different brands / models at the same time, no need to
switch. Pls follow these steps:
1.1 Set the two air conditioners through the above-mentioned A/B/C methods and remember the
correct codes.
1.2 Set the two codes founded in Step 1 for the two air conditioners using the B> Manual cod
input method. The air conditioners can be set several times, and only the final two codes will
be used.
1.3. Press and hold SET and then A.SWING
the screen flashes. The setting is completed and the remote can now control two air conditioners.
Note: If the A or C methods are used to search codes for the air conditioners again, the function to
control two units will be automatically cancelled.
! We suggest you try the codes for the first A/C and mark the correct one, then find the code for the second
air conditioner. When the second A/C works correctly with the DOUBLE remote control, enter the manual
code of the first one again and complete the setting with step 1.3, the final 2 codes will be used.
2. Temperature range lock (Hotel Energy Saving function)
This function can set the adjustable temperature range for the remote.
2.1 Keep pressed SET button and then press the TEMP▲ button and hold them for 3 seconds.
When COOL icon flashes on the screen, the highest temperature can be set.
2.2 Press the TEMP▲ or TEMP▼ buttons to adjust the highest temperature, for example, set to 24°C.
Press SET to exit.
2.3 Keep pressed SET button and then press TEMP▼ and hold them for 3 seconds. When the
HOT icon flashes on the screen, the lowest temperature can be set.
2.4. Press the TEMP▲ or TEMP▼ buttons to adjust the lowest temperature, for example, set to 20°C.
Press SET to exit. Now the temperature range the remote can control is set from 20°C-24°C.
Cancel the lock:
Keep pressed SET button, then TIME ON and hold them down. The screen will flash and then turn off.
The temperature lock function is now cancelled.
3. Child lock function
Lock: Keep pressed SET and then M.SWING
Unlock: Keep pressed SET and then M.SWING
4. Clock function setting
4.1 Keep pressed SET and then press MODE
4.2 Press the TEMP▲ (or TEMP▼) button to increase (or decrease) by 1 hour.
4.3 Press the SET button to complete setting the hour. Now the minute digits flash.
Press the TEMP▲ (TEMP▼) button to set the minutes.
4.4 After the minutes are set, press the SET button to exit clock setting.
5. Timer on/off function
The remote control is equipped with the timer function of the original AC remote. Press the TIME ON
or TIME OFF buttons (one press for one hour), the air conditioner timer light will switch on.
This means that the air conditioner timer function is now operational.
* This function requires the air conditioner to have the timer function, or else this button will not work.
6. Fast cool/heat function
Press the Fast Cool
auto wind direction.
Press the 'Fast Heat
auto wind direction.
* In the heating mode, press the E.A.HEAT
Only applicable for certain models.
ANY PROBLEMS?
We thank you for purchasing a w e l l c l i m a product covered by a legal warranty.
This remote control is compatible with 99% of the air conditioners on the market. It can operate only
if the air condiotioner receiver works well.If you find any problems or remote control cannot be used
appropriately, please visit HELP and FAQs page on our website www.wellclima.com or contact us
and we will provide our best service for you.
In compliance with directive 2012/19/EU D.L. N°49/2014 Multiservizi (owner of wellclima brand) being the
suppliers of this products issues the following information: it is mandatory not to dispose of the RAEE as if
they were urban waste, but to carry out a separate collection of them.
When delivering the equipment upon purchase of a new one, the same manufacturer shall provida in re-
using, recycling it or other forms of recycle through measures implemented and approved by the public
administrations. Such information is supplied in order to prevent potential effects on the enviroment and
human healt due to the presence of dangerous substances in electronic equipments or due to an improper
use of the same. Therefore every electronic equipment sold shall subject to this directive and shall be mar-
ked with the symbol shown here below.
DOUBLE - MANUAL INSTRUCTION
O t h e r l a n g u a g e s o n w w w . w e l l c l i m a . c o m
SETTING OF THE REMOTE CONTROL
Buttons correspond to brands
RESTORE TO FACTORY SETTING
REMOTE CONTROL FUNCTIONS
Fun
Blowing
Mode Key direction
control
DISPLAY SIMBOLS
Fun
COOL DRY
ADDITIONAL FUNCTIONS
button: The air conditioner will be set to cooling mode: 21°C, strong wind,
button: The air conditioner will be set to heating mode: 27°C, strong wind,
C
button and hold them down. Release the two
button and hold them down about 3 seconds to
Fun Fun
Automatic
blowing
direction
Fun Fun
Cooling Fun
buttons simultaneously. Release the buttons when
buttons. The screen displays the Child Lock
buttons. The 'Child Lock
buttons until the hour digits flash.
button to start the electrical assistant heating function.
Unauthorized reproduction of all or part of this guide is prohibited.
Imported by Multiservizi - via Trento 100 - Capriano del Colle - BS - Italy
Design and technical parameters may vary without notice.
Power
ON/OFF
HEAT
' icon disappears.
All rights reserved - Copyright © Multiservizi
Fun
LED
Fan Speed
icon.