Technical Data - Marmitek CONNECT 310 Modo De Empleo

No proper 3D picture
• You should point the remote control at the external infrared receiver, not at the switcher.
• Infrared signals have a maximum reach of approximately 10 metres. Try a shorter distance.
• Replace the battery in the remote control, it could be empty.
Remote control does not work
• Check whether the HDMI source has been set to 3D and/or that this is set to automatic.
• Both the HDMI source as well as the HD screen must support the same 3D formats.
• Check whether the proper 3D picture is reproduced by directly connecting the HDMI source
to the screen with an HDMI cable.
Do you still have questions? Please check out www.marmitek.com for more information.

TECHNICAL DATA

Resolution
Supported HDTV Resolutions
Supported 3D formats
Supported PC Resolution (max)
Maximal Pixel Frequency (max)
Maximal Bit Rate (max)
In- and outputs
HDMI Input (19-pin female)
HDMI Output (19-pin female)
Maximal HDMI cable length
Remote control
Infrared remote control
Housing Switcher
Dimensions (H x W x D)
Weight
Ambient
Ambient temperature
Ambient humidity
Power
External power adaptor
Specifications may be modified without prior notice.
6
480p, 576i, 576p, 720p, 1080i, 1080p
[email protected]/24Hz, [email protected]/60/50Hz
1920 x 1200
225 MHz
2.25 Gbps
3 HDMI
1 HDMI
15 metres
Battery included CR2025
80 x 18 x 58mm
250 g
+0 to +40° C
10% to 85%
Input: 100-240VAC @50-60Hz Output: 5VDC @ 300mA
© MARMITEK