Better Homes and Gardens BH48-084-899-03 Manual De Instrucciones página 7

H
G/H
3
3. Insert two 30 mm Wood Dowels (3) into the inner holes of the Left Side Panel (C). Tap in with a rubber
mallet, if necessary. Make sure that you use a small amount of glue with both ends of all dowels.
NOTE: It is very important to use a small amount of glue on both ends of dowels.
4. Align the drilled holes on the Left Side Molding (G) with the inserted Wood Dowels (3) on the Left
Side Panel (C), and then press them together. Attach the Left Side Molding (G) in place by engaging
two Cam Locks (1) (Refer to page 3 on Cam Lock system operation supplement).
5. Repeat the same procedure to combine Right Side Molding (H) with Right Side Panel (D).
Assembly Instructions
1
C/D
Cam Lock
(4 used in this step)
①
D
Raw edge
G
C
M8 x 30 mm Wood Dowel
(4 used in this step)
7
Raw edge
③