Specific Safety Rules - Smarter tools 71PC Air Tool Kit Manual De Instrucciones

5. Store idle tools out of reach of children and other untrained persons.
Tools are dangerous in the hands of untrained users.
6. Maintain tools with care. Do not use a damaged tool. Tag damaged
tools "Do not use" until repaired.
7. Check for misalignment or binding of moving parts, breakages of parts,
damaged air hose (not included), and any other condition that may
affect the tool's operation. If damaged, have the tool serviced before
using. Many accidents are caused by poorly maintained tools.
8. Use only accessories that are recommended by the manufacturer for
your model. Accessories that may be suitable for one tool may become
hazardous when used on another tool.
9. Guard against electric shock. Prevent body contact with grounded
surfaces such as pipes, radiators, ranges, and refrigerator enclosures.
Service
1. Tool service must be performed only by qualified repair personnel.
Service or maintenance performed by unqualified personnel could result
in a risk of injury.
2. When servicing a tool, use only identical replacement parts. Follow
instructions in the "Inspection, Maintenance and Cleaning" section of
this manual. Use of unauthorized parts or failure to follow maintenance
instructions may create a risk of injury.

1.3 SPECIFIC SAFETY RULES

1. To avoid accidental injury, always wear ANSI-approved safety glasses,
a full face shield, and ear protection when operating pneumatic tools.
2. Use clean, dry, regulated compressed air at 90 PSI. Do not exceed the
recommended 90 PSI. Never use oxygen, carbon dioxide, combustible
gases, or any other bottled gas as a power source for this tool.
3. When connecting to the air supply: Prior to each use, if an automatic
oiler is not used, add two drops of air tool oil (not included) into the air
inlet fitting of the tool body.
4. Always disconnect the tool body from its compressed air supply source,
and squeeze the trigger to release all compressed air in the tool before
performing any maintenance or service.
WARNING!
RISK OF ELECTRICAL SHOCK.
THIS TOOL IS NOT PROVIDED WITH AN INSULATED
GRIPPING SURFACE.
1-4A