Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Autofeed Technology
The Stack and Shred 80X has been designed to automatically
shred up to 80 sheets from the auto-feed chamber and up to 6
sheets through the manual feed slot. The auto-feed mechanism
has been designed to handle paper fastened with staples and
paper clips and pulls a few sheets of paper at a time into the
cutting mechanism to minimize the risk of paper jams.
Operation
Unpack the product.
1
Plug the shredder in to a working outlet.
2
Ensure the ON/OFF switch on the back of the shredder is in the
3
"ON" position, which will illuminate the LED bulb shown by the
standby symbol (
).
To start shredding, move the slide switch to the Auto position
4
( ), which places the shredder into auto mode. You are now
ready to shred.
To load the shredder, simply lift the loading door handle (see
5
fig1) to open the loading door and insert documentsYou can
open the door further to 90 degrees for easier access if
required. Load up to 80 sheets at a time into the feed chamber.
Do not fill above the 80 MAX level, this could damage
the shredder (see fig 2).
The shredder will start the shredding cycle automatically ONLY
6
after closing the loading door.
If you only have up to 8 sheets to shred, you can use the manual
7
feed slot, provided the auto feed chamber is empty (see fig 3).
If the shredder is left in auto mode for more than 2 minutes
8
without being used, the shredder will automatically turn back to
Sleep mode in order to save power.
The shredder will automatically 'wake up' from sleep mode
9
when paper is inserted into the shred mouth or you open the
loading door.
Bin or Loading Door Open Safety
Function
As a safety precaution, if the bin or loading door is opened
during shredding, the shredder will stop and the Bin Full
indicator will illuminate.
Rare Occasions of Jamming
In the unlikely event of the shredder jamming, the Stack
and Shred 80X will stop shredding. Check that the bin is not
full then try clearing the jam using the reverse (
continuous jam boost (
) buttons then return to Auto
mode (
). If this is unsuccessful follow the reverse function
instructions.
Reverse Function
If you want to reverse paper out while shredding, use the
1
reverse button (
).
Reverse the paper out then turn the machine off using the
2
switch at the rear of the shredder. Remove the paper from
the manual feed slot (if being used) or open the loading
door, remove the remaining stack of paper, then pull the
jammed paper free of the cutting mechanism.
To resume shredding return the slide switch to the auto
3
position (
) and turn on the machine by using the ON/OFF
switch at the rear of the shredder.
Over Heating
If the Stack and Shred 80X is used continuously for over
9 minutes the shredder may overheat and the cool down
indicator will illuminate red (
to cool down. When the shredder is ready to be used the
thermometer symbol will no longer illuminate. If the shredder
needs to cool down while shredding, no action is needed. The
shredder will automatically restart shredding paper once it has
cooled down after periods of continuous use. All you need to
do is ensure paper is loaded into the chamber and the bin is
empty when the machine is cooling down.
Credit Card Shredding
The Stack and Shred 80X can shred credit cards. Switch the
shredder to auto mode and insert the credit card between the
markings in the manual feed slot (see fig. 4). Only shred one
credit card at a time.
Swingline encourages customers to recycle shredded
paper. Please note that shredded paper cannot be
recycled if mixed with credit card shards. If recycling,
please separate shredded paper and credit cards.
Bin Full
The shredder will not function when the bin is full and the bin
full symbol (
• Pull open the bin slowly to empty.
• Push the empty bin back into place and the machine will
resume shredding.
Maintenance
The rollers on the auto-feed mechanism may become dirty over
time, please wipe clean with a dry cloth to maintain maximum
product performance.
The auto-start infra-red sensor, located in the paper feed entry-
slot, can occasionally become covered in paper-dust causing the
shredder to run despite no paper being fed into the machine.
Switch the shredder off at the rear of the machine and carefully
clean the sensor using a cotton-swab (see fig 6).
Lubrication of the Shredder
) and
Only use oil sheets to lubricate. ACCO Brands accepts no liability
for product performance or safety when other types of lubricants
are used on any part(s) of this machine. Insert the oil sheet
into the manual feed slot and NOT in the auto-feed chamber.
Using an oil sheet in the auto-feed chamber will contaminate
the feed rollers preventing the auto-feed mechanism shredding.
Follow the maintenance instructions if the rollers become
contaminated. Do not directly oil the shredder.
Shredder Accessories
We recommend that a paper waste sack for recycling shredded
paper is used on all models.
Accessory
Recycling Waste Bag
). Please allow the shredder
) is illuminated. You should empty the bin.
Part Number
1765028
6
Tabla de contenido
