Measuring Your Weight - A&D Medical UC-352BLE Manual De Instrucciones

Measuring your Weight

Step On Weighing
1. Confirm that the scale is turned off, and
step on the scale gently.
• Measurement starts when you step on the
scale.
• A progress bar is displayed during mea-
surement. Stand up straight and remain as
still as possible during measurement.
2. Step off the scale when "StEP" and "oFF"
are alternately displayed with three beeps.
• If you do not step off, the scale beeps
every two seconds.
• The scale turns off automatically after
2 minutes.
• All display segments are indicated when
you step off the scale.
• Do not touch the scale while all display
segments are indicated. It may cause
misreading.
3. Confirm the measurement results.
• The scale turns off automatically 60
seconds after the measurement results are
displayed.
• Data is automatically sent to the receiver if
the receiver is in the receivable state.
• If the scale is not paired with a receiver,
the data is stored in the scale memory. (See
"Transmitting Temporarily Stored Data".)
• Data stored in the scale memory cannot
be viewed on this scale.
• You can also shut the power off by
pressing the set switch.
• Most recent readings will be shown on the
screen.
the scale is
Measurement starts when you step
E-9
Beep
Beep beep beep
+ -
lb
k g
lb