Time Settings - A&D Medical UC-352BLE Manual De Instrucciones

Ensuring a good connection
• Ensure the space between this scale and the receiver is unobstructed. The
communication distance may be shortened due to the building construction or
other obstructions. In particular, communication may not be possible through
reinforced concrete walls, etc.
• Do not use the Bluetooth
equipment, near devices that emit electro-magnetic waves such as micro-
wave ovens, locations that have a large number of obstructions, or other poor
environments for radio waves. It may cause the connection to be frequently
interrupted, communication speeds to drop substantially, and errors to occur.
• When used near an IEEE802.11g/b/n wireless LAN device, the devices
cause mutual radio wave interference, and the communication speed may drop
or connection may be impossible. In this situation, turn the power of the device
that you are not using off, or change the location where it is used.
• If the scale does not communicate properly when used near a wireless de-
vice or broadcast station, change the location where it is used.
The communication distance between this scale and the receiver is approximately 32 feet or 10
meters.
This distance may become shorter due to the surrounding environment; therefore check that the
distance is close enough for data to be transmitted after the measurement.

Time Settings

This scale has a built-in clock. The date and time of measurement are included in
the measurement data. The clock is synced with the clock in the mobile device.
There is no need to set the clock on the scale.
®
connection near a wireless LAN or other wireless
Caution
E-11