Before Requesting Service; Maintaining The Scale - A&D Medical UC-352BLE Manual De Instrucciones

Ocultar thumbs Ver también para UC-352BLE:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encour-
aged to try to correct the interference by one or more of the following measures:
■ Reorient or relocate the receiving antenna.
■ Increase the separation between the equipment and receiver.
■ Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
■ Consult the dealer or an experienced radio/TV technician for help.

Before Requesting Service

Symptoms
"E" is displayed
"E - 0" is displayed
"Err" is displayed
"E-10" is displayed
"E-11" is displayed
is displayed
Nothing is displayed when
the setting switch is
pressed
The measurement
results are greatly
different from the
expected values.

Maintaining the Scale

• If the scale becomes dirty, soak a cloth in water or mild detergent, wring the
cloth out thoroughly and then wipe the scale clean.
• After wiping away the dirt with the damp cloth, dry the scale using a soft, dry
cloth.
• Never use alcohol, benzene, thinner or other harsh chemicals to clean the
scale.
•Remove the batteries from the battery compartment, when the scale is not
going to be used for a long time.
Exceeds the maximum capacity (
Exceeds the maximum capacity (
Exceeds the maximum capacity (
Communication error.
Remove and reinstall the batteries.
Remove and reinstall the batteries. Or replace all four batteries with new
AAA
size alkaline batteries.
Place the scale on a solid level surface.
Remove any foreign objects that might be touching the bottom of the
scale.
E-13
Corrective Action
450lb/200kg
).
450lb/200kg
).
450lb/200kg
).

Capítulos

Tabla de contenido
loading

Tabla de contenido