Brinly AS-40 BH Manual Del Propietário página 3

==================================================================================================
• Do not drive close to creeks, ditches and public highways.
• Watch out for traffic when crossing or near roadways.
• When using any attachment, don't allow anyone near the
vehicle while in operation.
• Keep the vehicle and attachment in good operating condition
and keep safety devices in place.
• Keep all nuts, bolts and screws tight to be sure the equipment
is in safe working condition.
• The vehicle and attachment should be stopped and inspected
for damage after striking a foreign object. The damage should
be repaired before restarting and operating the equipment.
• See tractor equipment owner's manual for safe operation of
the equipment.
CAUTION
=================================================
• To avoid damage to Tines, always engage transport wheels
to raise the Tines when crossing concrete or asphalt walks,
drives, or roads.
• Use the Aerator-Spreader only on an established lawn, never
on newly laid sod.
• To avoid personal injury and/or equipment damage never
exceed the recommended operating speed range of 3 to 5
MPH.
• Tines have sharp points. Wear gloves and handle with care.
• Only tow your Aerator-Spreader behind vehicles for which it
was designed, riders and lawn/garden tractors.
• Do not stand/ride on Aerator-Spreader, bodily injury could
result.
• Never exceed the Hopper weight capacity of 100 pounds for
AS-402.
• Do not attempt to disconnect Aerator from tractor with weight
in Hopper.
• When backing-carefully back straight to avoid jack-knifing
which could result in damage to equipment.
Installation Questions?
Missing Parts? Replacement Parts?
DON'T GO BACK TO
THE STORE!
Please call our Customer Service
Department, Toll Free: 877-728-8224
or [email protected]
English Manual
SAFETY AND REFERENCE
STOP
REFERENCE
=================================================
A note about nuts used in the assembly of
your Aerator Spreader:
JAM NUTS AND HEX NUTS
JAM NUT HEX NUT
LOCK NUTS AND NYLON LOCK NUTS
NYLON
LOCK NUT
LOCK NUT
NOTES
=================================================
3
Jam Nuts and Hex
Nuts spin freely on the
bolt threads.
NOTE: Usually a
lock washer is used to
securely lock the nut
in place.
Lock Nuts & Nylon Lock
Nuts provide resistence
after several turns on the
bolt threads.
NOTE: A wrench is
normally required during
installation.
L-1711BH-E