Brinly AS-40 BH Manual Del Propietário página 11

==================================================================================================
Assembly Step 5-B
Hardware Panel 5
1. On one side, from an
outside edge, run a 5/16 x 3"
Hex Bolt (37) through the
support assembly (21) and
the tow bar (20).
2. Secure the bolt with a Hex Lock
Nut (2).
3. Repeat on the other side of the hopper
and then add tube caps (13) to the ends
of the tow bars as illustrated.
NOTE: For the next step, use the same side of the hopper as the transport lock (3) - added on Step 4.
Assembly Step 6
Hardware Panel 6
1. Slide the grip (29) over
the end of the lift handle (22).
2. Utilizing the holes at the other end of the lift
handle (22), find and align with the remaining two
holes of the support assembly (21).
3. From the outside edge, run two 5/16 x 1-3/4" bolts (42)
through the handle and support assembly.
4. Secure bolts in place with a 5/16" lock washer (44)
and 5/16" hex nut (40).
x2
40
English Manual
ASSEMBLY
44
21
20
40
42
11
37
37
2
13
x2
22
21
40
22
44
40
44
29
42
42
L-1711BH-E