Fellowes Galaxy e Wire Manual Del Usuario página 4

ENGLISH
BEFORE YOU BIND
Galaxy includes two methods of wire comb closure, for all sizes of wire comb diameters between 6 and 14mm.
1– Visual scale. – ideal for binding single documents.
The moving closing jaw includes an easy to read scale
14mm 9/16"
2– Selectable lock control. – ideal for multiple documents of the same sizes.
Set the red STOP bar to the preferred position. Turn the control wheel towards MAX
or MIN positions as required.
The red stop bar moves up and down within the central window.
1
1. Select the correct wire comb
diameter using the storage
tray guide.
STEPS TO BIND – SINGLE DOCUMENT
1
1. Starting with the rear cover.
Load punched sheets directly onto
the hanging open wire comb.
4
10mm
12mm 1/2"
2
2. Hang the selected wire
comb onto wire comb support.
2
2. Punch and hang the front
cover. Punch and hang the
remaining sheets.
8mm 5/16"
3/8"
M a x
Max
Min
3
3. Test punch scrap sheets to
check edge guide setting.
3
3. Lift the wire comb upwards off
the hooks. Carefully place into the
open wire closing jaws. Ensure the
wire comb is open and touching the
bottom of the mechanism.
6mm 1/4"
M n i
14mm 9/16"
STOP
6mm 1/4"
4
Max 20
(80gsm)
4. Punch sheets in small batches
that do not overload the machine
or user.
4
4. Lift the wire closing lever
forwards. The closing scale guide is
on the moving jaw. Close the jaws
until the wire gauge shows the size
of wire being closed.