Product may vary slightly from what is illustrated.
Fabric guide
1. Spray nozzle
2. Water-fill hole
3. Fabric select dial
- Temperature
- Smart Steam ™ system
4. Spray button
5. Comfort Grip ™ handle (models IM400, IM405 and IM415 only)
6. 360° pivoting cord
7. Heel rest
8. Fabric guide
9. Translucent water tank
10. Nonstick soleplate
How to Use
this appliance is intended for household use only.
GETTING STARTED
• Remove any labels, stickers or tags attached to the body or soleplate of the iron.
• Please go to www.prodprotect.com/applica to register your warranty.
Important: For optimum performance, let the iron stand for 90 seconds before
beginning to iron.
Note: use ordinary tap water for ironing. do not use water processed through a home
softening system.
FILLING WATER TANK
. tilt the iron and using a clean cup, pour water into water-
fill hole (A) until the water reaches the MaX mark on the
water tank. Refill as needed.
. Plug in the iron.
Tip: if unsure of a garment's fiber, test a small area (on an
A
inside seam or hem) before ironing.
STEAM IRONING
the smart steam™ system automatically produces steam when you turn the fabric
select dial between settings and 6 (B).
. turn the fabric select dial to appropriate setting (between
and 6) for your fabric (B).
Note: see fabric guide and read garment's label to help you
determine fabric type. Be sure there is water in the reservoir.
B
steam is automatically turned off between settings 0 and .
. When finished ironing, turn the fabric select dial to 0 and unplug the iron.
Important: Always stand the iron on its heel rest when powered on but not in use.
SPRAY MIST
use
to dampen tough wrinkles at any setting (C).
. Be sure the iron is filled with water.
. on first use, pump the spray button a few times.
C
DRY IRONING
. turn the fabric select dial to setting , or (dRY) to
iron without steam (D). the smart steam™ system will
automatically turn off.
. to dry iron at higher settings, empty the water from the
D
reservoir to prevent steaming.
5