How To Use; Steam Ironing; Dry Ironing - BLACK&DECKER Home The Classic F63E Manual De Instrucciones

Product may vary slightly from what is illustrated.
1. Water-fill hole
2. Temperature selector
3. Steam button
4. Heel rest
5. Fabric guide
6. Water window
7. Button groove
8. Soleplate
3

How to Use

This appliance is for household use only.
GETTING STARTED
Remove any labels, stickers or tags attached to the body or soleplate of the iron.
Note: Use ordinary tap water for ironing. Do not use water processed through a
home softening system.
Important: For optimum performance, let the iron stand for 90 seconds before
beginning to iron.
FILLING WATER TANK
1. With the iron unplugged and the steam button latched in
the down position, use a clean cup and pour water into
the fill hole (A). Refill as needed.
2. Plug in the iron and let it stand on its heel rest.
k
A
SELECTING TEMPERATURE
1. Use the fabric guide on the iron to select the proper
temperature setting for the fabric to be ironed (B).
Tip: If unsure of a garment's fiber, test a small area (on an
inside seam or hem) before ironing. If there is a brown
buildup on the soleplate, lower the setting and/or reduce
k
B starch.
2. Once you determine the fabric type, set the temperature
selector to the appropriate setting for your fabric (C).
3. When finished ironing, place iron on its heel rest, turn
temperature selector to OFF and unplug the iron.
k
C

STEAM IRONING

1. Be sure there is water in the water tank.
2. Turn the temperature selector between settings 5 and 7.
3. Unlatch the steam button to the Up position (D). If steam
does not start, gently bump the soleplate on the ironing
k
board a few times. If water drips from vents, turn the
D
selector to a higher setting.

DRY IRONING

1. Turn the temperature selector to the desired setting and latch the steam button
down. For extended periods of dry ironing, empty the water from the iron.
2. If you want to empty the water, hold the iron over a sink with the tip pointing
down. Water will empty out the fill hole. Stay clear of splashing hot water.
ANTI-DRIP SYSTEM
The anti-drip system prevents water spotting at low temperatures.
4