Replacement Wiper Blades - Dedicated Micros WIPER UNIT Manual De Instalación

3. Replacement Wiper Blades

Replacement wiper blades for the Dedicated Micros housing wipers are supplied as a single length
blade that can be cut down to the size required for all Dedicated Micros housings. The dimensions
for the blades are shown in the table below.
Fig. 3 Replacing Wiper Blades diagram
Mark up the replacement blade to the correct dimensions 'X' and 'Y' .
Cut the blade using a hacksaw or junior hacksaw beginning at the metal fold furthest from the rubber
blade. The end of the blade may be trimmed using a sharp knife.
DO NOT attempt to cut the metal blade holder with a guillotine or wire cutters as this distorts the
blade and reduces the contact area with the window, making the wiper ineffective.
The information contained in this document is for guidance only.
Specification and availability of goods are subject to change without notice.
6
Dedicated Micros ©2010