Installation Notes - Dedicated Micros WIPER UNIT Manual De Instalación

1. Mounting Configuration
Fig. 1 Mounting configuration
KEY
A.
B.
C.
D.
E.
F.

Installation Notes:

1.
2.
3.
4
Wiper Blade
Washer Nozzle
Water Outlet Tube
M4 fixings
Housing 506, 515, 516 or 517
Spacer
Attach wiper to housing using M4 fixings/gasket, as supplied with camera housing.
Before attaching water outlet tube ensure the pump is primed by following the steps
below.
a. Fill bottle with clean water.
b. Attach short length of tube to outlet.
c. Suck water through tube until it reaches pump.
d. Connect the water outlet tube to the washer nozzle.
e. The unit is now ready for use.
Washer nozzle is supplied as standard and is positioned on the wiper arm as
shown above.
Dedicated Micros ©2010