General Safety Information - Dedicated Micros WIPER UNIT Manual De Instalación

General Safety Information

This equipment shall only be installed by qualified service personnel.
The final installation must adhere to all national wiring regulations.
The disconnect device must comply with IEC 60947.
WARNINGS
Read instructions before installing and power up.
Instructions should be kept for future reference.
If this unit shows signs of damage or malfunction, immediately disconnect from
mains and contact Dedicated Micros.
CE NOTICE (EUROPEAN UNION).
Marking by the symbol CE indicates compliance of this DM product to the Electromagnetic
Compatibility Directive 89/336/EEC, and the Low Voltage Directive 73/23/EEC of the European
Union. Such marking is indicative that this system meets the following technical standards.
• EN 61000-6-3 EMC Standard Residential, Commercial and Light Industry.
• EN 61000-3-3 Limitations of voltage changes, fluctuations and flicker in public low-
voltage supply systems for equipment with rated current up to 16A.
• EN 61000-3-2 Limits for harmonic current emissions for equipment with rated
current up to 16A.
• EN 50130-4 Immunity requirements for components of fire, intruder and social
alarm systems.
• EN 60950 Safety of IT and related equipment.
• EN 55022 Class B. Radiated Emissions Standard, suitable for Commercial or
Residential use.
• EN 60825-1 Safety standard for LED's and Lasers.
Further details about these applicable standards can be obtained from Dedicated Micros LTD. 1200
Daresbury Park, Daresbury, Cheshire, WA44HS.
A "Declaration of Conformity" with all relevant European Union Directives has been made, is on file
and is available from the Dedicated Micros address above.
This product is marked with the CE symbol and indicates compliance with all applicable directives.
Directive 89/336/EEC.
A "Declaration of Conformity" is held at Dedicated Micros Ltd., 1200 Daresbury Park, Daresbury,
Cheshire, WA44HS.
Dedicated Micros ©2010
3