Installation & Commissioning - SOMFY LT 28 Guia De Instalacion

Installation & Commissioning
[1]. Tube preparation
a. Cut the tube to the required length.
Deburr the tube and remove the swarf.
b. For smooth tubes, cut a notch with
the exact measurements given in figure
[b].
[2]. Motor preparation
a. Fit the drive wheel to the motor and
the la plaquette on the motor head.
b. Measure the length (L) between the
drive wheel and the head end.
c. Slide the motor into the tube.
For smooth tubes, position the notch on
the crown.
d. Fix the tube to the motor with 4 xØ 5
mm self-tapping screws depending on
the dimension (L -10mm).
e. Mount the motorized tube on the end
bracket.
f. Mount the motorized tube on the
motor bracket.
[3]. Rotation according to power
supply
[4]. End-limit adjustment
a. Enclencher les 2 boutons de
réglages.
b. Down limit adjustment :
Press the Down button to move the
blind to the down position.
Press the MY button when it reaches
the desired down position.
Désenclencher le bouton de réglage
correspondant au sens descente.
Le store est réglé
c. Up limit adjustment :
Press the Up button to move the blind
to the up position.
Press the MY button when it reaches
the desired up position.
Désenclencher le bouton de réglage
correspondant au sens montée.
DéPANNAGE
The blind does not move:
Check:
a. Power supply to the motor (24 V).
b. Motor wiring.
The motor runs in the opposite direc-
tion:
Check:
a. Motor wiring.
b. Reverse the wires if necessary.
The equipment stops to soon
Check:
a. The crown is properly fitted to the
tube.
b. The end-limits of the motor are
properly adjusted.
Copyright © 2009 Somfy SAS. All rights reserved.
[1]
.a
ø mini = 26,6 mm e = 4 mm
[2]
.a
.c
.e
L - 10 mm
[3]
.a
[4]
.b
.b
L = 7 mm
.b
.d
L - 10 mm
+
+
-
.c
1
L
.f
+
2