Lenco PDR-035 Manual De Usuario página 7

Displaying DAB + Station Information
There are several types of information as listed below. To change the display information, press the INFO/MENU repeatedly.
1. Radio Text scrolling
Shows music titles or program details provided by the selected radio station.
2. Signal Bar
Transmission signal level. The more the rectangles are filled, the stronger the signal is received. The unfilled rectangle is the
threshold level where the signal strength received should exceed this threshold. To improve the reception, adjust the antenna
position.
3. Program Type (PTY)
Type of program provided by the radio station
4. Multiplex Name
Displays name of multiplex to which the current station belongs
5. Frequency
Current channel number and frequency
6. Signal Error Rate
Shows the error rate. The larger this value, the more errors it receives. To improve the reception, adjust the antenna position.
7. Audio Bit Rate
This is the current channel audio Bitrate
8. Time
Displays the current time provided by the radio station
9. Date
Displays the current date provided by the radio station
OTHER DAB + MENU OPERATIONS
Press and hold the INFO/MENU button to access the menu control. Then rotate the ENTER knob (or press the
different options as described below.
Prune Invalid
This function removes inactive stations.
1. Press and hold the INFO/MENU button to access the menu control.
2. Rotate the ENTER knob (or press the
3. Rotate the ENTER knob (or press the
4. Press the ENTER knob to confirm.
5. To quit the menu control, press the BACK button repeatedly.
Dynamic Range Control (DRC)
DRC can make quieter sounds easier to hear when the unit is used in a noisy environment. The DRC level of a broadcast is set by the
selected radio channel and transmitted with the service. Changing the DRC value on your unit enables you to apply a scaling factor to
this level.
There are three levels of compression:
DRC high:
DRC low:
DRC off:
1. Press and hold the INFO/MENU button to access the menu control.
2. Rotate the ENTER knob (or press the
3. Rotate the ENTER knob (or press the
4. Press the ENTER knob to confirm.
5. To quit the menu control, press the BACK button repeatedly.
Note:
- Not all DAB + radio stations are able to use DRC function. If the station does not support DRC then the DRC setting will have no
effect.
- After you have adjusted the DRC level the sound may be louder.
or button) until the "Prune Invalid" is selected and then press the ENTER knob.
or button) to select "Yes".
Maximum compression as sent with the transmitted service
Set to 1/2 that of the sent transmitted service
No compression
or button) until the "DRC" is selected and then press the ENTER knob.
or button) to select "High", "Low" or "Off".
7
or button) for