Connecting Peripheral Equipment; Video Recorder; Other Equipment; To Select Connected Equipment - Philips streamium Manual Del Usario

Connecting peripheral equipment

Remove the stand cover and the clip on rear panel of the television to expose the connectors.
Arrange the leads by passing them through the television stand. Replace the stand cover.
The EXT1 socket has audio, CVBS/RGB inputs and audio, CVBS outputs.
:
FM ANT

Video recorder

:
FM ANT EXT 1
VCR

Other equipment

:
FM ANT EXT 1
10
Audio Out
EXT 1
Carry out the connections shown opposite, using a good quality
euroconnector cable.
If your video recorder does not have a euroconnector socket, the only
connection possible is via the aerial cable.You will therefore need to
tune in your video recorder's test signal and assign it programme
number 0 (refer to manual store, p. 5).
To reproduce the video recorder picture, press
Video recorder with decoder
Connect the decoder to the second euroconnector socket of
the video recorder.You will then be able to record scrambled
transmissions.
Satellite receiver, decoder, CDV, games, etc.
Carry out the connections shown opposite.

To select connected equipment

µ
Press the
Most equipment (decoder, video recorder) carries out the switching itself.
AV in
AV 3
S-VIDEO
VGA In Audio In
key to select .
EXT1
ñ
.